Explosion-proof twilight switch DVG-SVET (CCA-H-RELAY)

Window of the explosion-proof twilight switch DVG-SVET is made from impact-resistant heat-resistant glass. Borosilicate glass contains sodium and calcium in their composition which makes them more resistant to aggressive atmospheres and to thermal impact due to low expansion coefficient. Installed twilight switch sends a command to close or open a circuit when a preset illumination tresholddefined by a photocell is reached.

Full production cycle starting from casting molds and to ready product is performed at the explosion-proof equipment plant “ZAVOD GORELTEX” Co. Ltd. on the territory of the Russian Federation.

Scope of application - hazardous indoor and outdoor areas in accordance with explosion protection marking, GOST 30852.13-2002 (IEC 60079-14:1996) that regulates application of electrical equipment in hazardous areas, dangerous production facilities of I, II, III, IV hazard classes under supervision of Rostekhnadzor and national supervisory bodies of the CU and the CIS countries.

CERTIFICATES

Marking:

1Ex db IIC T6...T5 Gb
Ex tb IIIC T85°С...T100°С Db

Mining equipment marking:

РН1, РН2

Protection:

IP66/IP67/IP68/IP69
IK08

Certificates and permits:

ЕАЭС RU C-RU.НА67.В.00163/21

РОСС RU С-RU.МЮ62.В.00097/23

Maritime Register upon request (check cost and terms of Type Approval Certificate issuance with manager)

TU 27.12.31-037-72453807-2017

GOST R ISO 9001-2015 (ISO 9001:2015)

KZ39VEH00005608

TECHNICAL DATA

Ambient temperature, °С:

-60...+40 (Т6/Т85°С)
-60...+60 (Т5/Т100°С)
-60...+60 (for mine normal and general industrial versions)

Maximum voltage, V:

~380

Maximum current, A:

63

Grounding:

2 stainless steel ground clamps (inner and outer)

Cover fastening:

Threaded joint

Installation inside enclosure:

2 or 4 racks for mounting panel installation

Coating:

Antistatic polymer-epoxy coating, frictionally intrinsically safe, resistant to operating environment and ionizing radiation. Color RAL 7035

Sealing:

Silicone rubber (in cover groove), silicone seal

Enclosure material:

Modified corrosion-resistant aluminum-silicon alloy, resistant to salt spray and other chemical substances including hydrogen sulfide and hydrochloric acid vapors, frictionally intrinsically safe.Window - impact-resistant heat-resistant borosilicate glass.

Enclosure fastening:

2 or 4 external mounting points

Electric shock hazard protection class:

I

Mass, kg:

4

Climatic version:

NF1 (upon request NF2, NF3, NF4, NF5, F1, F2, F3, F5, T1, T2, T3, T5, MU1, MU2, MU3, MU4, W2.1, W5)

DIMENSIONS, OPTIONS, ACCESSORIES, ORDER CREATION

OVERALL AND MOUNTING DIMENSIONS

Marking	Rated current	Number of contacts	Sizes
			Outer			Window	Inner
			A	B	C	OL	E	F	OG
DVG-SVET-6-11	6	NO+NC	151	151	125	90	126	174	11
DVG-SVET-25-30	25	3NO	175	175	129,5	90	150	195	11
DVG-SVET-25-40	25	4NO	175	175	129,5	90	150	195	11
DVG-SVET-40-30	40	3NO	235	235	164	140	196	267	14
DVG-SVET-40-40	40	4NO	235	235	164	140	196	267	14
DVG-SVET-63-30	63	3NO	235	235	164	140	196	267	14
DVG-SVET-63-40	63	4NO	235	235	164	140	196	267	14

OPTIONS, ACCESSORIES AND VERSIONS

ORDER CREATION

External surface coating as per customer’s specification

/RAL (___)

Anti-condensation coating

/AP

Fastening bracket

/SKOBA

Mine normal execution

/RN

FORMATION OF ORDER

DVG-SVET	-	Х	-	Х	-	Х	/	Х	– TU 3400-005-72453807-07
									Device name
									Rated current: 6A; 25A; 40A; 63A
									Contact block: 11 - normally closed + normally open contacts NC+NO (only for 6А) 30 - three normally open contacts 3NO 40 - four normally open contacts 4NO
									Quantity and dimension types of cable glands
									Options, accessories and versions

Example: DVG-SVET-40-30 -2KNV2N-TU 3400-005-72453807-07.

ADDITIONAL INFORMATION

TWILIGHT SWITCH WITH TWO NORMS OF REGULATED ILLUMINATION

Application

Twilight switch sends a command for closing or opening of a circuit when preset illumination threshold, defined by a photocell, is reached

The relay enables contactor control, as its contacts can switch current in inductive AC circuit. Switching of switch’s contact occurs upon reaching of preset illumination threshold.

TABLE OF NAMES' MATCHING

Table of names’ matching

Previous international name "ZAVOD GORELTEX" Co. Ltd. TU 3400-005-72453807-07	The Customs Union name "ZAVOD GORELTEX" Co. Ltd. TU 3400-005-72453807-07
CCA-H-06-RELAY	DVG-SVET-6-11
CCA-H-25-RELAY	DVG-SVET-25-30
CCA-H-25-RELAY/N	DVG-SVET-25-40
CCA-H-40-RELAY	DVG-SVET-40-30
CCA-H-40-RELAY/N	DVG-SVET-40-40
CCA-H-63-RELAY	DVG-SVET-63-30
CCA-H-63-RELAY/N	DVG-SVET-63-40

CONFORMITY TO STANDARDS IN RUSSIA

GOST R IEC 60079-0-2011, GOST 14254-96 (IEC 529-89), GOST 30852.0-2002 (IEC 60079-0:1998), GOST 30852.1-2002 (IEC 60079-1:1998), TR CU 012/2011, GOST IEC 61241-1-1-2011, Ch. 7.3 PUE, Ch. 7.4 PUE, RD 5.2-093-2004, GOST R IEC 60079-31-2010