Светильники серии СГЛ01...Л/Н из нержавеющей стали для люминесцентных ламп

Explosion-proof light fixtures SGL01...L/N from stainless steel for fluorescent lamps

PURPOSE AND SCOPE OF APPLICATION

Explosion-proof light fixtures SGL01...L/N made from stainless steel for fluorescent lamps are intended for illumination of industrial premises, open production sites and other places, where explosive atmospheres may be present.

The enclosure is manufactured from stainless steel, while the globe is made from heat- and impact-resistant glass. Lamps, terminals, ballast and socket are installed inside the enclosure.

Explosion-proof fluorescent light fixtures series SGL01...S have feed-through and dead-end connection by means of a wire or a metal hose with wire cross-section 0.5-1.0 mm2 and are additionally completed with cable glands.

Manufacturing of explosion-proof LED light fixtures series SGL01 from antistatic impact-resistant glassfiber reinforced polyester chemically resistant to operating environments and UV radiation is possible.

Optionally, emergency power supply source with Ni-Cd storage battery for emergency lighting is built in the light fixture. When switching to the emergency mode, only one lamps emits light. Period of operation in emergency mode – 120 minutes, charge time - 24 hours.

ADVANTAGES
- Stainless steel enclosure resistant to the exposure of aggressive environments.
- Emergency power supply unit may be built in the light fixture housing.
- Period of operation in emergency mode – 120 minutes.
- Electronica ballast helps to increase the service life of the light fixtures and ensure high power coefficient.
- Globe is manufactured from heat- and impact-resistant glass.
- Light fixtures with built-in type of mounting may be used for concealed mounting into suspending concrete ceilings.

Scope of application – outdoor and indoor areas hazardous with gas as per explosion protection marking, GOST 30852.13-2002 (IEC 60079-14:1996) and other codes regulating application of electrical equipment in hazardous areas.

CONFORMITY TO STANDARDS IN RUSSIA

ГОСТ Р МЭК 60079-0-2011, ГОСТ 30852.0-2002 (МЭК 60079-0:1998), ГОСТ 30852.14-2002, ГОСТ Р МЭК 60079-31-2010, ГОСТ 22782.3-77, ГОСТ 24754-2013, ГОСТ 30852.20-2002, ГОСТ 24471-80, ГОСТ Р 53320-2009, ТР ТС 004/2011, ТР ТС 012/2011, ТР ТС 020/2011

CERTIFICATES

Marking:

1Ex db eb IIC T4 Gb

Ex tb IIIC T112°С Db

Mining equipment marking:

РН1/РН2

Protection:

IP66

TECHNICAL DATA

Ambient temperature, °С:

-40…+55

Rated voltage:

~190...230 V
~220...230 V (for option /IBP)

Holder:

G13 (two contacts)

Enclosure material:

Stainless steel grade 08Х18Н10 as per GOST 5632-2014 (AISI 304)

Electric shock hazard protection class:

I

Climatic version:

NF1 (upon request NF4, NF5, T1, T2, T3, T5, F5, MU1, MU2, MU3, MU4, W5)

DIMENSIONS, OPTIONS, ACCESSORIES

MARKING

Explosion-proof uninterruptible power supply (x - capacity of rechargeable battery)

/IBPx

Lamp in set

/LAMPA

Marine version

/MORE

Non-explosion-proof version

/PROM

Light fixture preservation

/KONSERVACIJA

Earthquake-resistant version

/MSK-64

OVERALL AND MOUNTING DIMENSIONS
Чертеж взрывозащищенного люминесцентного светильника СГЛ01...Л/Н из нержавеющей стали

**Light fixtures series SGL01...L/N**
Model	Number of lamps	Power, W	Mode of operation	Voltage, V	Dimensions, mm				Mass, kg
Model	Number of lamps	Power, W	Mode of operation	Voltage, V	A	B	C	M	Mass, kg
SGL01-118L.../N	1	18	normal	~190...230 V	706	132	277	500	10,7
SGL01-218L.../N	2	18	normal	~190...230 V	706	132	277	500	10,7
SGL01-136L.../N	1	36	normal	~190...230 V	1306	132	277	800	18,1
SGL01-236L.../N	2	36	normal	~190...230 V	1306	132	277	800	18,1
SGL01-118L.../N.../IBP	1	18	normal/emergency	~220...230 V	706	132	277	500	10,7
SGL01-218L.../N.../IBP	2	18	normal/emergency	~220...230 V	706	132	277	500	10,7
SGL01-136L.../N.../IBP	1	36	normal/emergency	~220...230 V	1306	132	277	800	18,1
SGL01-236L.../N.../IBP	2	36	normal/emergency	~220...230 V	1306	132	277	800	18,1