Explosion-proof manual fire alarms IP-535-GORELTEX1-V
Product Description
Explosion-proof manual fire alarms of the IP-535-GORELTEX1-V series are designed for continuous, round-the-clock operation in fire alarm and fire extinguishing systems as a passive element when working together with control and monitoring devices.
Strengths
- Certified equipment ensuring safety and uninterrupted operation.
- The body made of aluminum alloy with alloying modifiers combines exceptional mechanical strength and corrosion resistance.
- Providing operation as both a single element and in a group of detectors in a fire alarm system.
- Possibility of inclusion in the alarm circuit with both normally closed and normally open contacts.
- The design of the detectors and their manufacturing technology, as well as the highly reliable switches used, designed for repeated switching on and off.
- Protection against mechanical damage IK10 and a high degree of protection against moisture and dust IP66/IP67
Customers who bought this item also ordered
Compliance
GOST 30852.0-2002 (IEC 60079-0:1998)
GOST 30852.1-2002 (IEC 60079-1:1998)
GOST 30852.10-2002 (IEC 60079-11:1999)
GOST IEC 61241-1-1-2011
Chapter 7.3 of the Electrical Installation Code
Chapter 7.4 of the Electrical Installation Code
TR CU 012/2011
RD 5.2-093-2004
GOST R 53325-2009
GOST Р МЭК 60079-31-2010
GOST 30852.20-2002
GOST 24754-2013
Certificates
EAEU RU C-RU.NA91.B.00189/21 
EAEU N RU D-RU.RA02.V.24582/25 
ROSS RU C-RU.MY62.V.00062/22 
Maritime Register upon request (contact the manager for the cost and timeframe for obtaining the STO)
EAEU RU C-RU.PB74.V.00107/20 
TU 26.30.50-050-72453807-2017
GOST R ISO 9001-2015 (ISO 9001:2015) Markings
Explosion protection marking
1Ex db IIC T6...T5 Gb 0Ex ia IIC T6...T5 Ga X Ex tb IIIC T85°С...T100°С Db Ex ia IIIC T85°C...T100°C DaMarking of mining equipment
RN1/RN2
Degree of protection
IP66 / IP67
IK10
IK10
Installation
Category II for gas subgroup IIA, IIB, IIC, zones 1, 2;
Category III for dust, explosive dust environments containing volatile particles, non-conductive and conductive dust; Underground workings that are not hazardous for gas (methane) and coal dust
Category III for dust, explosive dust environments containing volatile particles, non-conductive and conductive dust; Underground workings that are not hazardous for gas (methane) and coal dust
Technical data
Ambient temperature, °C
-60...+40 (T6/T85°C)
-60...+55 (T5/T100°C)
-60...+55 (T5/T100°C)
Maximum voltage, V
690
Maximum switching current, A
10
connection
2,5mm terminals2
Threads on connecting holes
Metric M25x1,5 GOST 24705-2004
Покрытие
Antistatic polymer-epoxy coating, friction-proof, spark-proof, resistant to working environments and ionizing radiation. Color: red, RAL 3001
Housing material
Aluminum alloy with alloying modifiers
Detector class according to GOST R 53325-2012
B
Class of protection against electric shock
I
Weight, kg
1,5
Climatic performance
UHL1 (as required by UHL2, UHL3, UHL4, UHL5, HL1, HL2, HL3, HL5, T1, T2, T3, T5, OM1, OM2, OM3, OM4, B2.1, B5)
Design parameters
Options
3D models
Additional Information
CONNECTION DIAGRAM OF THE IP-535-GORELTEX1-B (CSE-IP-535) DETECTORS TO THE FIRE CONTROL AND RECEPTION PANEL (FIRE CONTROL UNIT)
Open circuit connection diagram (serial connection)
Short circuit connection diagram (parallel connection)
Connection parameters
| Type of control panel | Parallel connection (for short circuit) | Sequential connection (on opening) |
| LB-07 | Rд must provide current consumption >15 mA, Rок = 2 kOhm, VДок = КД522 | Rd = 11 kOhm, Rok = 2 kOhm, VDok = KD522 |
| Ray | Rd = 2,4 kOhm, Rok = 2,4 kOhm, VDok = KD521A | Rd = 2,2 kOhm, Rok = 2,4 kOhm, VDok = KD521A |
| PPK-2 | Rd = 1,2 kOhm, Rok = 3,6 kOhm, VDok = KD521A | Rd = 10,0 kOhm, Rok = 3,6 kOhm, VDok = KD521A |
| Bolid | Rд = 1,5 kOhm, Rок = 4,7 kOhm, VDок do not install | Rд = 8,2 kOhm, Rок = 4,7 kOhm, VDок do not install |
| Yakhont-16i | Rд = 1,8 kOhm, Rок = 8,2 kOhm, VDок do not install | Not applicable |
| VERS | Rд = 820 Ohm, Rок = 7,5 kOhm, VDок do not install | Rд = 10 kOhm, Rок = 7,5 kOhm. Do not install VДок. |
Differences between IPR class A and IPR class B
Differences between class A IPR and class B IPR in accordance with GOST R 53325-2012: class A IPR (IP-535-GORELTEX1-A, IP-535-GORELTEX2-A) are activated after the displacement of the indestructible drive element, accompanied by a change in the appearance of the IPR.
IPR class B (IP-535-GORELTEX1-V) are activated after two actions are performed:
1. providing access to the drive element by destroying or displacing the protective element designed as a drive element of class A;
2. subsequent manual activation of the drive element.
Leave a request
Quantity
Additional description
0 / 300
Drag files here
CAD "GorelTekh", questionnaires, necessary documents
or
IP-535-GORELTEX1-B - 1Х - 2Х / 3Х – TU 26.30.50-050-72453807-2017
1X - Contact group:
01 - one normally closed contact
10 - one normally open contact
11 - normally open + normally closed contacts
02 - two normally closed contacts
20 - two normally open contacts
03 - three normally closed contacts;
30 - three normally open contacts
01 + 20 - one normally closed contact + two normally open contacts
02 + 01 - two normally closed contacts + one normally closed contact.
01 - one normally closed contact
10 - one normally open contact
11 - normally open + normally closed contacts
02 - two normally closed contacts
20 - two normally open contacts
03 - three normally closed contacts;
30 - three normally open contacts
01 + 20 - one normally closed contact + two normally open contacts
02 + 01 - two normally closed contacts + one normally closed contact.
2X - Cable entry size (max. 2 pcs.)
3X - Options, accessories and versions
Example: ИП-535-ГОРЭЛТЕХ1-B-20-КНВ2Н-ТУ 26.30.50-050-72453807-2017
