Explosion-proof LED battery flashlights FOGOR04 (SECURLUX L3000)

Explosion-proof LED battery flashlights FOGOR04 are equipped with a unique optical system with two ultra bright LEDs and li-ion battery of the last generation that ensures long operation and low weight. The flashlight is intended for group and individual autonomous lighting when carrying out emergency repair and rescue works in hazardous and fire dangerous areas. The flashlight is also intended for underground use, including for mining rescue works.

The light fixture switches on in less than 1 second, LED radiation spectrum is characterized by absence of ultraviolet and infrared component.

The principles described in GOST R 53270-2009 FIRE LANTERN for use in the territory of Russia as a group fire flashlight are applied when designing the flashlights. FOGOR04 flashlights are used as group fire flashlight for fire extinguishing and emergency rescue works.

Explosion-proof LED battery flashlights FOGOR04 are resistant to low (up to -40°С) and high (up to +150°С) ambient temperatures, exposure to UV radiation, smoke, filth and water. The structure of flashlights and control elements enable to work in gloves.

Lamp turning at 90° helps to keep the flashlight in hands, fasten it to clothes or install on any surface with required light beam angle. Fire-resistant lamp glass does not dim and is resistant to the exposure of open fire and toxic smoke, which is important in case of fire or for emergency rescue works.

Explosion-proof LED battery flashlights FOGOR04 have five different impulse operating modes for light signaling or use of the flashlight as light signaling beacon.

FOGOR04 flashlights feature a unique optical system that is equipped with light beam deflector and LED light sources.

Low beam mode enables to illuminate ground area for user and ensure safe movement of the user or group without creating blinding counterlight.

High beam mode has a better penetrating power of a light beam and helps to illuminate longer distances and whole facilities. In order to reach maximum power of the flashlight, both lighting modes may be used simultaneously.

User may choose one of three light intensity modes at any time depending on lighting conditions, required brightness of a light source and duration of operation of the flashlight at remaining charge of the storage battery.

Digital display is located on the rear side of the housing of the device that shows the remaining battery operation time in current lighting mode. The signal of remaining charge of storage battery sufficient for less than 15 minutes of flashlight work is given.

Microprocessor control is used in FOGOR04 flashlights that performs diagnostics and control of operation of nodal elements of the device and protects storage battery from overdischarge.

Thanks to the microprocessor control, the flashlight features self-diagnostics of nodal elements of the device. Modular construction of flashlights helps to quickly change out-of-operation nodes, which makes the device serviceable and repairable.

When the flashlight is inserted in the charger, charging of storage battery starts. If the flashlight is inserted in the charger in on position, it automatically switches off. Full charging time of the storage battery is shown on the flashlight display.

Emergency lighting function activates the flashlight emergency mode, which simplifies the access of staff to flashlights that are located in charging stand or individual chargers in case of de-energizing. This function is activated automatically in case of power failure and may be used for lighting of equipment and pathways at facilities.

Automatic charging devices

Technical data of automatic charging devices
Versions	Individual charging device or group charging device for 3 or 5 flashlights
Protection:	IP54
Supply voltage:	12 V ~110/220 V (50/60 Hz)
Charging time:	4 hours 25 minutes
Functions:	Indication of charging (Red LED – charging, green – charging completed) Electronic system of storage battery charge control Check of charge level of storage battery each time when the flashlight is placed in the charging device.

Automatic charging devices

Marking	Number of charger slots	Voltage, V	Dimensions, mm	Mass, kg
ZU04/1-12DC	1	12	76x131x57	0,5
ZU04/1-24DC		12/24
ZU04/1-220AC		~110/220
ZU04/3-24DC	3	12 / 24	256x102x57	1,3
ZU04/3-220AC		~110/220
ZU04/5-24DC	5	12 / 24	406x102x57	2,1
ZU04/5-220AC		~110/220

Example: FOGOR04-TU 27.40.39-028-72453807-2017

Charging device is ordered separately.
Example: ZU04/1-12DC -TU 27.40.39-028-72453807-2017

DESCRIPTION OF FLASHLIGHT PARTS