Explosion-proof room heaters GTG-RADIATOR
Product Description
GTG-RADIATOR heaters are designed to heat and maintain a positive (set) temperature in process rooms, automation cabinets, and units with control and measuring equipment and other equipment that require a positive temperature for normal operation.
Plate heaters provide uniform heating of enclosed spaces. They are explosion-proof and reliable, eliminating direct contact between the heating elements and the installed equipment. A flat, explosion-proof silicone heating element is mounted on an aluminum plate within a protective perforated metal casing. More efficient heating is ensured by installing an additional, specially insulated layer where the plate attaches to the casing.
The GTG-RADIATOR heating element is a vibration-resistant, corrosion-resistant silicone plate. Thanks to its flat design, the heater does not accumulate dust.
Scope of application: hazardous areas of premises and outdoor installations, and mines that are not hazardous due to gas or dust, according to explosion protection marking, GOST 30852.13-2002 (IEC 60079-14:1996) and areas hazardous due to ignition of combustible dust, according to GOST IEC 61241-3-2011, hazardous production facilities of I, II, III, IV hazard classes, supervised by Rostekhnadzor of the Russian Federation and national technical supervision agencies of the CU and CIS countries.
Plate heaters provide uniform heating of enclosed spaces. They are explosion-proof and reliable, eliminating direct contact between the heating elements and the installed equipment. A flat, explosion-proof silicone heating element is mounted on an aluminum plate within a protective perforated metal casing. More efficient heating is ensured by installing an additional, specially insulated layer where the plate attaches to the casing.
The GTG-RADIATOR heating element is a vibration-resistant, corrosion-resistant silicone plate. Thanks to its flat design, the heater does not accumulate dust.
Scope of application: hazardous areas of premises and outdoor installations, and mines that are not hazardous due to gas or dust, according to explosion protection marking, GOST 30852.13-2002 (IEC 60079-14:1996) and areas hazardous due to ignition of combustible dust, according to GOST IEC 61241-3-2011, hazardous production facilities of I, II, III, IV hazard classes, supervised by Rostekhnadzor of the Russian Federation and national technical supervision agencies of the CU and CIS countries.
Strengths
- Safe design: the casing prevents direct contact between the heating element and the equipment. Dust-proof: the flat heating element design prevents dust accumulation. Corrosion resistance: the silicone heating element is corrosion-resistant. Vibration resistance: reliable operation under vibration and mechanical stress. Versatility: suitable for indoor and outdoor installations in hazard classes I-IV.
Customers who bought this item also ordered
Compliance
GOST 31610.0-2014 (IEC 6079-0:2011)
TR CU 012/2011
TR CU 004/2011
TR CU 020/2011
Chapter 7.3 of the Electrical Installation Code
Chapter 7.4 of the Electrical Installation Code
GOST Р МЭК 60079-7-2012
GOST IEC 60079-31-2013
GOST IEC 60079-30-1-2011
GOST IEC 60079-1-2013
GOST 24754-2013
GOST 30852.20-2002
Certificates
EAEU RU-C.RU.AZh58.V.00655/20 
EAEU N RU D-RU.RA08.V.46554/25 
ROSS RU C-RU.EX01.B.00075/24 
Maritime Register upon request (contact the manager for the cost and timeframe for obtaining the STO)
TU 28.21.13-041-72453807-2017
GOST R ISO 9001-2015 (ISO 9001:2015) Markings
Explosion protection marking
1Ex e IIC T6....T3 Gb X Ex tb IIIC T85°C...T200°C Db X
Marking of mining equipment
RN1/RN2
Degree of protection
IP66K
Installation
Category II for gas subgroup IIA, IIB, IIC, zones 1, 2;
Category III for dust, explosive dust environments containing volatile particles, non-conductive and conductive dust;
Non-explosive zone of above-ground buildings and open areas
Category III for dust, explosive dust environments containing volatile particles, non-conductive and conductive dust;
Non-explosive zone of above-ground buildings and open areas
Technical data
Ambient temperature, °C
-60 ... + 60
Maximum supply voltage, V
~230 (50/60 Hz)
Power, W
600, 1200
Threads on connecting holes
RC 1/2" conical pipe
Electric circuit
Direct connection to terminals L, N, PE with a cross-section of 4 mm2
Working position in space
any
Class of protection against electric shock
I
Weight, kg
10
Climatic performance
UHL1 (as required by UHL2, UHL3, UHL4, UHL5, HL1, HL2, HL3, HL5, T1, T2, T3, T5, OM1, OM2, OM3, OM4, B2.1, B5)
Design parameters
GTG-RADIATOR-600
GTG-RADIATOR-1200
Options
3D models
Revit models
zipAdditional Information
Leave a request
Quantity
Additional description
0 / 300
Drag files here
CAD "GorelTekh", questionnaires, necessary documents
or
GTG-RADIATOR - 1X - 2X / 3X – TU 28.21.13-041-72453807-2017
1X - Power, W: 600; 1200
2X - Cable entry size
3X - Options, accessories and versions
Example: ГТГ-РАДИАТОР-1200-1КНВ1MНК-ТУ 28.21.13-041-72453807-2017
