Explosion-proof equipment plant
section3_logo_img
+7(812) 448-90-90
PRODUCTS R. STAHL SERVICES RESOURCES ABOUT US

Control and indicating device with polymer base

x
<
>
PURPOSE AND SCOPE OF APPLICATION

Explosion-proof control and indicating devices are intended for the assembly by the customer himself on the mounting panel of control and indicating panel. The devices are equipped with cable, the length is upon customer‘s request. The connection is carried out to the terminal box or control cabinet with respective type of explosion protection.

One of the distinct features of GORELTEX explosion-proof products is the ergonomic design of control, indicating and signaling elements. Big size of control elements enables to work in gloves (which is important when working outdoors at low temperatures). Indicating elements have large diameter and are equipped with a reflector which makes the signal clearly visible at large viewing angle and various degrees of surface dirtiness. A wide range of control, indicating and signaling elements of standard version are offered, as well as typical version, upon customer’s request. Nameplates for buttons and signal lamps are manufactured upon request.

Органы управления машиной и (или) оборудованием должны быть выполнены так, чтобы их форма, размеры и поверхности контакта с пользователем соответствовали способу захвата (пальцами, кистью) или нажатия (пальцем руки, ладонью, стопой) Органы управления машиной и (или) оборудованием должны быть выполнены так, чтобы их форма, размеры и поверхности контакта с пользователем соответствовали способу захвата (пальцами, кистью) или нажатия (пальцем руки, ладонью, стопой) IT IS IMPORTANT TO KNOW

Technical Regulation TR CU 010/2011 "On the safety of machinery and equipment".

Annex 1. General regulations of safety machines and equipment. Clause 15:

«…Controls devices of a machine and (or) equipment must be constructed so that their form, sizes and contact surfaces of the user correspond to a capture way (fingers, hand) or pressing (hand finger, palm, foot)…»

For the equipment intended for operation at ambient temperatures below zero or in aggressive environment, control elements of the equipment must have the increased size, since the user operates the equipment in protective gloves. It is prohibited to use the control elements that do not meet this requirement.