Explosion-proof equipment plant
Non-explosion-proof industrial dust-proof and moisture-proof heating plates GTG-PLASTINA6-Х/PROM are used for heating and maintaining of temperature of all types of enclosures, cabinets and boxes, such as distribution boards, cabling cabinets, lighting cabinets, computers, etc.
Non-explosion-proof industrial dust-proof and moisture-proof heating plates GTG-PLASTINA6-Х/PROM are intended for maintaining of medium temperatures of pipes, reservoirs, bins, etc. Minimum bending radius of plate is not less than 30 mm.
Non-explosion-proof industrial dust-proof and moisture-proof heating plates GTG-PLASTINA6-Х/PROM consist of two plates that consist of two layers of fiberglass (upper and lower) on the silicone base. This material is characterized by high heat output since the thickness of plates is rather small (standard thickness of sheet is 1.5 mm). Heating plates enable to reach homogeneous heat distribution and accurate temperature control. Thanks to their high level of flexibility, heating plates are suitable for heating of cylindrical and uneven surfaces.
It is recommended to apply CRV-RTV sealant or CRV-TERMO heat-conducting paste for better transmission of thermal energy.
Plates maybe fastened to the equipment by means of double-sided adhesive tape and silicone adhesive (silicone glue - room-temperature-vulcanizing technology).
TU 3400-007-72453807-07 TU 28.21.13-041-72453807-2017
| Model | Dimensions, mm | Power, W | Power density W/cm2 | |
| A | B | |||
| GTG-PLASTINA6-50/T190/PROM | 150 | 90 | 50 | 0,37 |
| GTG-PLASTINA6-70/T190/PROM | 210 | 100 | 70 | 0,33 |
| GTG-PLASTINA6-100/T190/PROM | 185 | 120 | 100 | 0,45 |
| GTG-PLASTINA6-150/T190/PROM | 200 | 150 | 150 | 0,5 |
| GTG-PLASTINA6-300/T190/PROM | 300 | 200 | 300 | 0,5 |
| GTG-PLASTINA6-600/T190/PROM | 400 | 300 | 600 | 0,5 |
Non-explosion-proof industrial dust-proof and moisture-proof heating plates GTG-PLASTINA6-Х/PROM may be completed with temperature control devices.
| Model | Type | Heating temperature, °C |
| DVG-TERMOSTAT2-(-5/13)1 | Fixed temperature |
7-13 |
| DVG-TERMOSTAT2-(0/18)1 | 12-18 | |
| DVG-TERMOSTAT2-(60/78)1 | 72-78 | |
| GTG-PT | Programmable temperature |
0...120 |
Note : for option / GTG-PT , additionally specify the order code of the GTG-PT programmable thermostat;
for option / DVG-T2 , additionally specify the order code of the DVG-TERMOSTAT2 bimetallic thermostat.
| GTG-PLASTINA6 | - | Х | - | X | / | Х | /PROM – TU 28.21.13-041-72453807-2017 |
| Type of device | |||||||
| Power, W: 50, 70, 100, 150, 300, 600 | |||||||
| Maximum heating, °С: Т190 | |||||||
| Options, accessories and versions |
Example: GTG-PLASTINA6-600/Т190/PROM - TU 28.21.13-041-72453807-2017
| Scope of application of heating plates | |||
 |
 |
 |
 |
| Heating of metal structures and reinforced iron for repair works | Heating of pipes surfaces | Heating of pipes surfaces | Heating of containers with lubricants in industrial equipment |
 |
 |
 |
 |
| Heating of reflectors and movable elements of parabolic antennas | Heating of parts of aerospace structures | Heating of hydraulic drives and joints of power devices | Prevention of freezing of pumping chambers |
 |
 |
 |
 |
| Heater of optical elements of video cameras | Heating of refined materials | Heating elements for drying modules in textile industry |
Heating of collectors and dust collectors |
 |
 |
 |
 |
| Using in hot compressing units | Heating of reservoirs of proportioning devices | Heater of photosensitive materials | Heater for fixation of paint in high speed typographic devices |
 |
 |
 |
 |
| Application of plates in dryers | Devices for paraffin drying for dryer | Heating of cuttings for wood processing industry | Heating of plates for production of semiconductors |
 |
 |
 |
 |
| Application of plates in cutting-edge medical equipment | Heating formwork for concrete works in polar zones | Physical and chemical laboratory equipment | Heating of molds for plastic molding |
