Explosion-proof sockets RGS (FSQC)

+
x
<
>
Explosion-proof sockets RGS (FSQC)PURPOSE AND SCOPE OF APPLICATION

RGS explosion-proof sockets are intended for connection of portable equipment: portable lamps, measuring devices, storage batteries, pumps, fans, air blowers, compressors, generators and other non-stationary and portable devices.

RGS explosion-proof socket is switched on by input of VGS (FP) plug and turning it to 45°, which allows the internal switch to close. The switch of RGS socket turns on only when VGS plug is plugged in. The plug can be extracted from the socket only when the switch of RGS socket is in OFF position.

The housing of sockets and plugs is made from modified corrosion-resistant aluminum-silicon alloy, resistant to salt spray and other chemical substances. Antistatic polymer epoxy powder coating is used for coating. Coating color is RAL 7035.

RGS explosion-proof sockets are highly resistant to hydrogen sulfide exposure, which is confirmed in TR CU certificates. Service life of flameproof joints is more than 25 years.

According to IEC standard, sockets for different voltage, frequency, current and number of poles are impossible to connect. The grounding receptacle position to the guide is different for different voltage and frequency. In order to distinguish devices for different voltage and frequency, color coding is applied, as well as socket dimensions vary depending on the rated current values. Contacts and receptacles are located in a different way in IEC system in sockets with different number of poles and contacts, ground contact and its receptacle are bigger than other contacts and receptacles. All this is made to increase safety.

Scope of application – outdoor and indoor hazardous areas as per explosion protection marking, GOST 30852.13-2002 (IEC 60079-14:1996), areas with presence of combustible dust, as per GOST IEC 61241-3-2011, dangerous production facilities of I, II, III, IV hazard class supervised by Rostechnadzor of the RF and national technical supervision bodies of the Customs Union and CIS countries.

+
CONFORMITY TO STANDARDS IN RUSSIA
ГОСТ Р МЭК 60079-0-2011, ГОСТ 14254-96 (МЭК 529-89), ГОСТ 30852.0-2002 (МЭК 60079-0:1998), ГОСТ 30852.1-2002 (МЭК 60079-1:1998), ГОСТ IEC 61241-1-1-2011, ГОСТ Р МЭК 60079-31-2010, ТР ТС 012/2011, Гл. 7.3 ПУЭ, Гл. 7.4 ПУЭ
+
+
TECHNICAL DATA
Ambient temperature, °С:
-60...+60 (T6/T85°C)
-60...+75 (T5/T100°C)
-60...+85 (T4/T135°C)
-60...+85 (general industrial version)
Maximum voltage, V:
690
Maximum current, A:
63
Connection:
Direct connection to wire terminals with 10-16 mm cross-section2
Thread on connecting holes:
Coating:
Antistatic polymer epoxy coating, frictionally intrinsically safe, resistant to operating environment and ionizing radiation. Color RAL 7035
Enclosure material:
Modified corrosion-resistant aluminum-silicon alloy, resistant to salt spray and other chemical substances, including hydrogen sulfide and hydrochloric acid fumes, salty and acidic mine waters, frictionally intrinsically safe
Electric shock hazard protection class:
I
Climatic version:
NF1 (upon request NF2, NF3, NF4, NF5, F1, F2, F3, F5, T1, T2, T3, T5, MU1, MU2, MU3, MU4, W2.1, W5)
+
DIMENSIONS, OPTIONS, ACCESSORIES
MARKING
Fastening bracket
/SKOBA
Marine version
/MORE
Non-explosion-proof version
/PROM
+
OVERALL AND MOUNTING DIMENSIONS

Взрывозащищенные разъемы типа РГС

Type Current, A Voltage, V Number of poles Color Overall dimensions, mm Mounting dimensions Mass, kg
ØA E Y B C ØD X F ØW
RGS-63-250-3 63 250 3P+PE blue 187 36 230 330 215 2 x M40x1,5 85 180 13 4,88
RGS-63-415-3 63 415 3P+PE red
RGS-63-500-3 63 500 3P+PE black
RGS-63-690-3 63 690 3P+PE black
RGS-63-415-4 63 415 3P+N+PE red
RGS-63-500-4 63 500 3P+N+PE black
+
FORMATION OF MARKING
RGS - X - X - X / X  – TU 3400-005-72453807-07
                  Device name
                  Current, А: 63
                  Voltage, V: 250; 415; 500; 690
                  Number of poles: 3P+PE - 3, 3P+N+PE - 4
                  Options, accessories and versions

Example: RGS-63-250-3–TU 3400-005-72453807-07

+
CONFORMITY TO STANDARDS IN RUSSIA

Previous international name

"ZAVOD GORELTEX" Co. Ltd.

TU 3400-005-72453807-07

The Customs Union name

"ZAVOD GORELTEX" Co. Ltd.

TU 3400-005-72453807-07
FSQC 23410, RGS-10-3-3R,
FSQC 33410, RGS-10-3-5R
RGS-63-250-3, RGS-63-415-3,
RGS-63-500-3, RGS-63-690-3
FSQC 23415, RGS-15-3-3R,
FSQC 33415, RGS-15-3-5R
FSQC 23420, RGS-20-3-3R,
FSQC 33420, RGS-20-3-5R
FSQC 23430, RGS-30-3-3R,
FSQC 33430, RGS-30-3-5R
FSQC 23440, RGS-40-3-3R,
FSQC 33440, RGS-40-3-5R
FSQC 23450, RGS-50-3-3R,
FSQC 33450, RGS-50-3-5R
FSQC 23463, RGS-63-3-3R,
FSQC 33463, RGS-63-3-5R
+