Explosion-proof LED obstruction lights SGA02 (XLF-3)

Explosion-proof obstruction lights SGA02 (light signaling devices) are designed for installation on high buildings (towers) and are intended for light marking of high and elongated facilities, which may worsen safety conditions for moving objects (planes, jets, hang gliders, etc.) at night and in the twilight, as well as in the daytime in poor visibility.

Explosion-proof obstruction lights SGA02 (light signaling devices) conform to the requirements of REGA RF-94 (Civil Aerodrome Operation Manual) and ICAO global norms, annex 14 and requirements of Interstate Aviation Committee. LED lamps may operate in constant glowing mode, as well as in: twinkling, circular lighting up. 180 LEDs are characterized by bright illumination 360° in horizontal plane and 20° illumination in vertical plane. These LEDs ensure low energy consumption and long service life (about 50 thousand hours), which helps to reduce operation expenses.

The light fixtures are installed indoors and outdoors in potentially hazardous areas with presence of explosive and combustible gas and dust.

Upon special request, explosion-proof modular light signaling devices of different configuration and power are manufactured. Upon request, control system, emergency power supply, twilight switch and other required electronic components may be installed in the body of the module.

Scope of application – outdoor and indoor hazardous areas as per explosion protection marking, GOST 30852.13-2002 (IEC 60079-14:1996), areas with presence of combustible dust, as per GOST IEC 61241-3-2011, dangerous production facilities of I, II, III, IV hazard class supervised by Rostechnadzor of the RF and national technical supervision bodies of the Customs Union and CIS countries.

SGA02.../Т

SGA02.../P

SGA02.../D

Model	Lamp type	Voltage, V	Current consumption, А	Mass, kg
SGA02-SC(...)12AC/DC/Т	LED 14 W*	~/12...85	0,5	2,33
SGA02-SC(...)220AC/DC/Т	LED 14 W*	~/85...230	0,3	2,33
SGA02-SC(...)12AC/DC/P	LED 14 W*	~/12...85	0,5	2,73
SGA02-SC(...)220AC/DC/P	LED 14 W*	~/85...230	0,3	2,73
SGA02-SC(...)12AC/DC/D	LED 14 W*	~/12...85	1	6,16
SGA02-SC(...)220AC/DC/D	LED 14 W*	~/85...230	0,6	6,16

* Power of LED lamps depends on supply voltage and color of illumination.

SGA02

-

Х

(

Х

)

Х

/

Х

-

Х

-

Х

/

Х

– TU 3400-006-72453807-07

Device name

Lamp type: SC

Lamp color: Red- К; Yellow - ZH; Green - Z; Blue - S

Supply voltage: /~12...85V - 12АС/DC; /85...230 - 220AC/DC

Type of mounting: Ceiling - P; pipe - Т; Double light fixture - D

Type of light: Constant - P; Twinkling - М

Dimension type of cable gland

Options, accessories and versions

Example: SGA02-SC(К)220AC/DC/Т-P-KNV2MNK/R– TU 3400-006-72453807-07

CONNECTION IS CARRIED OUT WITH CABLE GLAND

Recommended cable glands:

KNV2MНNK/R - cable gland for non-armored cable, diameter of crimped cable 6 - 18 mm, nickel-plated brass KNVM2M-25NK/R - cable gland for non-armored cable in metal hoses, diameter of crimped cable 6 - 17 mm, inside diameter of metal hose 25 mm, nickel-plated brass KNVTV2MGNK/R - cable gland for non-armored cable in hoses, pipe conduits, metal hoses; inner thread for external connection is pipe cylindrical GOST 6357-81 3/4" G, diameter of crimped cable 6 - 18 mm, nickel-plated brass KNVM2M-20NK/R - cable gland for non-armored cable in metal hoses, diameter of crimped cable 6 - 17 mm, inside diameter of metal hose 20 mm, nickel-plated brass