Explosion-proof plate heaters GTG-RADIATOR (RETO-PLATE-RADIATOR)

+
x
<
>
Explosion-proof plate heaters GTG-RADIATOR (RETO-PLATE-RADIATOR)PURPOSE AND SCOPE OF APPLICATION

GTG-RADIATOR explosion-proof plate heating elements are intended for heating and maintenance of positive preset temperature in technological rooms, automation cabinets, units with control and measuring and other equipment that requires positive temperature for normal operation.

Plate heaters allow even heating of air in confined area; they are explosion-proof and reliable heating elements, which exclude direct contact of heating elements with installed equipment. Flat silicone explosion-proof heating element is fastened to the aluminum plate in the protective metal housing with perforation. More efficient heating is reached by an additional special layer of heat insulation in the point where the plate is fastened to the housing.

GTG-RADIATOR heating element is a vibration-resistant and corrosion-resistant silicone plate. The heater does not accumulate dust due to flat structure of the heating element.

Scope of application – outdoor and indoor hazardous areas and pits non-hazardous with gas or dust, as per explosion protection marking, GOST 30852.13-2002 (IEC 60079-14:1996), areas with presence of combustible dust, as per GOST IEC 61241-3-2011, dangerous production facilities of I, II, III, IV hazard class supervised by Rostechnadzor of the RF and national technical supervision bodies of the Customs Union and CIS countries.

+
CONFORMITY TO STANDARDS IN RUSSIA
ГОСТ Р МЭК 60079-0-2011, ГОСТ 14254-96 (МЭК 529-89), ГОСТ 30852.0-2002 (МЭК 60079-0:1998), ГОСТ Р МЭК 62086-1-2003, ГОСТ 30852.8-2002 (МЭК 60079-0:1998), ТР ТС 012/2011, ТР ТС 004/2011, ГОСТ IEC 61241-1-1-2011, ГОСТ 24754-2013, Гл. 7.3 ПУЭ, Гл. 7.4 ПУЭ, ГОСТ 30852.20-2002, ГОСТ Р МЭК 60079-31-2010
+
CERTIFICATES
Маркировка взрывозащиты Marking:
1Ex e IIC T3 Gb X
Ex tb IIIC T200°C Db X
Mining equipment marking:
РН1/РН2
Protection:
IP66
Certificates and permits:
ЕАЭС RU-C.RU.АЖ58.В.00655/20
ЕАЭС RU С-RU.МЛ02.В.00263/20
РОСС RU C-RU.EX01.B.00035/21
ГОСТ Р ИСО 9001-2015 (ISO 9001:2015)
Морской регистр по запросу (стоимость и сроки оформления СТО уточняйте у менеджера)
ТУ 3400-007-72453807-07
ТУ 28.21.13-041-72453807-2017
KZ39VEH00005608
+
TECHNICAL DATA
Ambient temperature, °С:
-60...+60
Maximum supply voltage, V:
~230 (50/60 Hz)
Power, W:
600, 1200
Thread on connecting holes:
RC 1/2” taper pipe
Electric diagram:
Direct connection to L, N, PE terminals with 4mm 2 cross-section
Operating position in space:
Any
Electric shock hazard protection class:
I
Mass, kg:
10
Climatic version:
NF1 (upon request NF2, NF3, NF4, NF5, F1, F2, F3, F5, T1, T2, T3, T5, MU1, MU2, MU3, MU4, W2.1, W5)
+
DIMENSIONS, OPTIONS, ACCESSORIES
MARKING
Nameplate with inscription as per customer’s specification
/NADPIS "_"
Enclosure temperature limitation
/100
Non-explosion-proof version
/PROM
+
OVERALL AND MOUNTING DIMENSIONS

GTG-RADIATOR-600

Взрывозащищенные защищенные пластинчатые обогреватели ГТГ-РАДИАТОР-600

GTG-RADIATOR-1200

Взрывозащищенные защищенные пластинчатые обогреватели ГТГ-РАДИАТОР-1200
+
FORMATION OF MARKING
GTG-RADIATOR  -  Х  -  Х  /  Х  – TU 3400-007-72453807-07
              Type of device
              Power, W: 600; 1200
              Dimansion type of cable gland
              Options, accessories and versions

Example: GTG-RADIATOR-1200-KNV1N-TU 3400-007-72453807-07

+
Расчёт затрат на отопления помещенияCalculation of costs for room heating
+