Explosion-proof spotlights SGP02 (RLEE)

PURPOSE AND SCOPE OF APPLICATION

Explosion-proof spotlights SGP02 are intended for illumination by directed light of industrial premises, open production sites and other places, where explosive atmospheres may be present.

The body of explosion-proof spotlights SGP02 is made from modified corrosion-resistant aluminum-silicon alloy, resistant to salt spray and other chemical substances. Antistatic polymer epoxy coating is used to paint the body from the outside. Color of painting - RAL 7035. Light-transmitting part - heat- and impact-resistant glass.

Full production cycle from foundry patterns to finished products is carried out by explosion-proof equipment plant “ZAVOD GORELTEX” Co. Ltd. (former “CORTEM-GORELTEX” Co. Ltd) in the territory of the Russian Federation.

These light fixtures are installed indoors and outdoors in potentially hazardous areas with presence of explosive and combustible gas and dust.

Scope of application – outdoor and indoor hazardous areas as per explosion protection marking, GOST 30852.13-2002 (IEC 60079-14:1996), areas with presence of combustible dust, as per GOST IEC 61241-3-2011, dangerous production facilities of I, II, III, IV hazard class supervised by Rostechnadzor of the RF and national technical supervision bodies of the Customs Union and CIS countries.

CERTIFICATES

Marking:

1Ex db IIC T3 Gb (для СГП02-250, СГП02-400)

1Ex db IIB+H₂ T3...T2 Gb (для СГП02-700, СГП02-1000)

Ex tb IIIC T167°C Db (для СГП02-250)

Ex tb IIIC T169°C Db (для СГП02-400)

Ex tb IIIC T190°C Db (для СГП02-700)

Ex tb IIIC T231°C Db (для СГП02-1000)

Protection:

IP66

TECHNICAL DATA

Ambient temperature, °С:

-60…+55 (for SGP02-250, SGP02-400)
-20…+55 (for SGP02-700, SGP02-1000)

Rated voltage:

~220 V

Holder:

E-40

Electric diagram:

Direct connection to the socket or terminals L, N, PЕ with cable with 4 mm² cross-section

Coating:

Antistatic polymer-epoxy coating, frictionally intrinsically safe,resistant to operating environment and ionizing radiation. Color RAL 7035

Enclosure material:

Modified corrosion-resistant aluminum-silicon alloy, resistant to salt spray and other chemical substances, including hydrogen sulfide and hydrochloric acid fumes, salty and acidic mine waters, frictionally intrinsically safe. Cover – heat-resistant impact-resistant glass.

Earthquake resistance:

9 points as per MSK-64

Electric shock hazard protection class:

Climatic version:

N3.1, N5, N5.1, F3.1, F5, F3.1, NF3.1, NF4...NF5, TH1...TH5, T1...T5, TA1...TA5, U4...U5, M3.1, M4, MT1...MT5, MU3.1, MU4, W3.1, W4 as per GOST 15150

IES файлы:

SGP02-400NA, high-pressure sodium lamp 400 W
SGP02-400HG, mercury-vapor lamp 400 W
SGP02-700HG, mercury-vapor lamp 700 W
SGP02-1000NA, high-pressure sodium lamp 1000 W
SGP02-1000M, metal-halide lamp 1000 W
SGP02-1000P, mercury-vapor lamp 1000 W

DIMENSIONS, OPTIONS, ACCESSORIES, MARKING

OVERALL AND MOUNTING DIMENSIONS

SGP02-250, SGP02-400

Чертеж прожектора направленного света СГП02

SGP02-700, SGP02-1000

Model	Lamp power, W	Lamp type	Socket	Temperature class	Dimensions, mm							Mass, kg
					Overall			Window	Mounting
					А	В	С	Øа	ØЕ	r	Ød
SGP02-250HG	250	Mercury-vapor lamp	Е40	Т3	420	447	626	284	250	109,75	12,5	28,8
SGP02-400HG	400	Mercury-vapor lamp	Е40	Т3	420	447	626	284	250	109,75	12,5	28,8
SGP02-700HG	700	Mercury-vapor lamp	Е40	Т3	600	589	758	398	250	109,75	12,5	44,25
SGP02-1000HG	1000	Mercury-vapor lamp	Е40	Т2	600	589	758	398	250	109,75	12,5	44,25
SGP02-250NA	250	High-pressure sodium lamp	Е40	Т3	420	447	626	284	250	109,75	12,5	28,8
SGP02-400NA	400	High-pressure sodium lamp	Е40	Т3	420	447	626	284	250	109,75	12,5	28,8
SGP02-700NA	700	High-pressure sodium lamp	Е40	Т3	600	589	758	398	250	109,75	12,5	44,25
SGP02-1000NA	1000	High-pressure sodium lamp	Е40	Т2	600	589	758	398	250	109,75	12,5	44,25
SGP02-1000HA	1000	Metal-halide lamp	Е40	Т2	600	589	758	398	250	109,75	12,5	44,25

Note:
HG: Mercury-vapor lamp
NA: High-pressure sodium lamp
HA: Metal-halide lamp

Взрывозащищенный корпус, содержащий пускорегулирующую аппаратуру

Box with ballast

Thread on connecting holes pipe taper ¾” GOST 6211-81

Separately installed ballast
Type of light fixture	Lamp power	Lamp type	Marking of the box with ballast
SGP02-250HG	250 W	Mercury-vapor lamp	SHORVA/250HG
SGP02-400HG	400 W		SHORVA/400HG
SGP02-700HG	700 W		SHORV/700HG
SGP02-1000HG	1000 W		SHORV/1000HG
SGP02-250NA	250 W	High-pressure sodium lamp	SHORVA/250NA
SGP02-400NA	400 W		SHORVA/400NA
SGP02-700NA	700 W		SHORV/700NA
SGP02-1000NA	1000 W		SHORV/1000NA
SGP02-1000HA	1000 W	Metal-halide lamp	SHORV/1000HA

№	Description
1	Nipple NVN
2	Fitting joints RZG
3	Flexible armored cable elements MGM
4	Fitting joints TSNN

Чертеж взрывозащищенного прожектора направленного света СГП02 с пускорегулирующей аппаратурой

OPTIONS, ACCESSORIES AND VERSIONS

MARKING

Lamp in set

/LAMPA

Marine version

/MORE

Non-explosion-proof version

/PROM

Chemical-resistant version X2 as per GOST R 51801-2011

/X2

Light fixture preservation

/KONSERVACIJA

Earthquake-resistant version

/MSK-64

FORMATION OF MARKING

SGP02	-	Х	Х	-	Х	-	Х	(Х)	/	Х	– TU 27.40.33-029-72453807-2017

											Type of device
											Lamp power, W: 250, 400, 700, 1000
											Lamp type: mercury lamp - HG; sodium lamp - NA; metal-halide lamp - HA
											Supply voltage: ~220V - 220AC
											Number and dimension type of cable glands
											Side of cable gland location
											Options, accessories and versions

Example of order: SGP02-700NA-220AC-KNV2MNK/R(C)/LAMPA-TU 27.40.33-029-72453807-2017

Datasheet for explosion-proof light fixtures and floodligts

Archive of IES files for GORELTEX lighting devices

DESIGN DESCRIPTION

Body made from modified corrosion-resistant aluminum-silicon alloy
Front cover made from heat- and impact-resistant glass

Hardened bracket made from galvanized steel

Inner and outer stainless steel grounding clamp
Wiring is made using cables with silicone insulation
Sealing rings made from silicone rubber resistant to acids and hydrocarbons
Antistatic polymer-epoxy coating, frictionally intrinsically safe, resistant to operating environment and ionizing radiation. Color RAL 7035

CONNECTION IS CARRIED OUT WITH CABLE GLAND

Recommended cable glands:

Взрывозащищенные кабельные вводы КНВ (FEC) для небронированного кабеля

KNV2MNK/R - cable gland for non-armored cable, diameter of crimped cable 6 - 18 mm, nickel-plated brass

Взрывозащищенный кабельный ввод серии КНВМ (FETG) для небронированного кабеля в металлорукавах

KNVM2M-25NK/R - cable gland for non-armored cable in metal hoses, diameter of crimped cable 6 - 17 mm, inside diameter of metal hose 25 mm, nickel-plated brass

Взрывозащищенные кабельные вводы КНВТВ (FETF) для небронированного кабеля в шлангах, трубопроводах, металлорукавах; внутренняя резьба для внешнего присоединения

KNVTV2MGNK/R - cable gland for non-armored cable in hoses, pipe conduit, metal hoses; inner thread for external connection pipe cylindrical GOST 6357-81 3/4" G, diameter of crimped cable 6 - 18 mm, nickel-plated brass

KNVM2M-20NK/R - cable gland for non-armored cable in metal hoses, diameter of crimped cable 6 - 17 mm, inside diameter of metal hose 20 mm, nickel-plated brass

Interactive selection of explosion-proof cable gland ...>>

**Accessories and spare parts**
PICTURE	DESCRIPTION	MODEL	CHARACTERISTICS
	Metal-halide lamp (upon request)	Е40	1000 W
	Mercury-vapor lamp (upon request)	Е40	250 W
			400 W
			700 W
			1000 W
	Sodium lamp with built-in starting pulse device (upon request)	Е40	250 W
			400 W
			700 W
			1000 W
	Socket	Е40	750 V 16А
	Support brackets for horizontal / vertical adjustment	SGP02-107	Galvanized steel
	Terminals	Installation of another type and number of terminals is possible	For special application 275V, 3x4 mm²
	Cable gland	Codes and characteristics of cable glands see in "Cable glands" section (to be ordered separately)