Explosion-proof sound signaling devices PGZ-POST, PGZ-POST-P, PGZ-POST-N (SHORVE-Q, SHORVE-KP-Q, SHORVE-S-Q)

+
+
x
<
>
Explosion-proof sound signaling devices PGZ-POST, PGZ-POST-P, PGZ-POST-N (SHORVE-Q, SHORVE-KP-Q, SHORVE-S-Q)PURPOSE AND SCOPE OF APPLICATION

Explosion-proof sound signaling devices PGZ-POST are special-purpose signaling devices intended for application in hazardous areas in security and fire alarm systems and other signaling systems. Explosion-proof light and sound signaling devices PGZ-POST are intended for continuous round-the-clock operation in a stand-by mode (possibility to send sound alarm signals) in hazardous areas of industrial and construction facilities where flammable gases and dust are present. 

Explosion-proof PSGE01 piezo-siren is applied as a source of sound signal in signaling devices PGZ-POST, PGZ-POST-P, PGZ-POST-N. Maximum level of sound pressure is 108 Db. The piezo-siren supplied with 220V signaling device is additionally completed with a power block installed inside the signaling device.

Scope of application – outdoor and indoor hazardous areas and pits non-hazardous with gas or dust, as per explosion protection marking, GOST 30852.13-2002 (IEC 60079-14:1996), regulating application of electrical equipment in hazardous and non-hazardous areas at dangerous production facilities of I, II, III, IV hazard class supervised by Rostechnadzor and national technical supervision bodies of the CIS countries.

+
CONFORMITY TO STANDARDS IN RUSSIA
ГОСТ 14254-96 (МЭК 529-89), ГОСТ 30852.0-2002 (МЭК 60079-0:1998), ГОСТ 30852.1-2002 (МЭК 60079-1:1998), ГОСТ 30852.8-2002 (МЭК 60079-0:1998), ГОСТ 30852.17-2002 (МЭК 60079-18:1992), ГОСТ 24754-2013, ТР ТС 012/2011, Гл. 7.3 ПУЭ, Гл. 7.4 ПУЭ, ГОСТ IEC 61241-1-1-2011, РД 5.2-093-2004, ГОСТ 30852.20-2002
+
CERTIFICATES
Маркировка взрывозащиты Marking:
1Ex e mb IIC T6…T5 Gb
Ex tb IIIC T85°С...T100°С Db
Mining equipment marking:
РВ Ex e mb I Mb (только для ПГЗ-ПОСТ-П, ПГЗ-ПОСТ-М и ПГЗ-ПОСТ-Н)(for PGZ-POST-P, PGZ-POST-M, PGZ-POST-N)
РП Ex e mb I MC (только для ПГЗ-ПОСТ-П, ПГЗ-ПОСТ-М и ПГЗ-ПОСТ-Н)(for PGZ-POST-P, PGZ-POST-M, PGZ-POST-N)
РН1
РН2
Protection:
IP66/IP69
IK08 (для ПГЗ-ПОСТ-М и ПГЗ-ПОСТ-Н)(for PGZ-POST-M, PGZ-POST-N)
IK10 (для ПГЗ-ПОСТ и ПГЗ-ПОСТ-П)(for PGZ-POST, PGZ-POST-P)
Certificates and permits:
ЕАЭС RU C-RU.НА67.В.00159/20
РОСС RU С-RU.МЮ62.В.00095/23
ЕАЭС RU С-RU.АБ53.В.00229/20
ЕАЭС RU C-RU.ПБ74.В.00150/20
ГОСТ Р ИСО 9001-2015 (ISO 9001:2015)
RU.OC ВССТ 0180-12-2023
IECEx CCVE 19.0002X
EESF 19 ATEX 053X
ТУ 3400-005-72453807-07
ТУ 27.90.20-038-72453807-2017
KZ39VEH00005608
+
TECHNICAL DATA
Ambient temperature, °С:
-60...+40 (Т6/Т85°С)
-60...+60 (Т5/Т100°С)
-60...+60 (for mine normal and general industrial versions)
Maximum voltage, V:
~230; ⎓12; ⎓24
Current consumption, A:
0,15 (for 12 V)
0,08 (for 24 V)
0,03 (for ~220 V)
Arrangement of cable glands:
As per customer's specification. Cable glands with taper thread are not used for this type of signaling devices
Coating:
I
Enclosure material:
Glassfiber reinforced polyester, chemically resistant to operating environment and resistant to UV radiation (PGZ-POST-P)
Modified corrosion-resistant aluminum-silicon alloy, resistant to salt spray and other chemical substances, including hydrogen sulfide and hydrochloric acid fumes, salty and acidic mine waters, frictionally intrinsically safe (by default) (PGZ-POST)
Stainless steel grade 08Х18Н10 as per GOST 5632-2014 (AISI 304), resistant to high temperatures and corrosion (PGZ-POST-N)
Maximum sound pressure level, dB:
108
Climatic version:
NF1 (upon request NF2, NF3, NF4, NF5, F1, F2, F3, F5, T1, T2, T3, T5, MU1, MU2, MU3, MU4, W2.1, W5)
+
DIMENSIONS, OPTIONS, ACCESSORIES
MARKING
Breather plug for moisture removal
/VKU
Drain plug for condensate removal
/DKU
Nameplates with light-reflective coating
/SVP
Nameplate with inscription as per customer’s specification
/NADPIS "_"
Marine version
/MORE
Non-explosion-proof version
/PROM
+
OVERALL AND MOUNTING DIMENSIONS

TYPICAL SOUND SIGNALING DEVICES

PGZ-POST141410-PSGE01...

Типовые посты звуковой сигнализации ПГЗ-ПОСТ141410-ПСГЕ01...

PGZ-POST-P141210-PSGE01...

Типовые посты звуковой сигнализации ПГЗ-ПОСТ-П141210-ПСГЕ01...

PGZ-POST-N151512-PSGE01...

Типовые посты звуковой сигнализации ПГЗ-ПОСТ-Н151512-ПСГЕ01...


Typical sound signaling devices PGZ-POST with PSGE01 piezo-siren
Marking for order Enclosure material Supply voltage, V Mass, kg
PGZ-POST141410-PSGE01/12DC-KNV1(D)-TU 3400-005-72453807-07 Alumonum-silicon alloy 12 3
PGZ-POST141410-PSGE01/24DC-KNV1(D)-TU 3400-005-72453807-07 Alumonum-silicon alloy 24 3
PGZ-POST141410-PSGE01/220AC-KNV1(D)-TU 3400-005-72453807-07 Alumonum-silicon alloy ~230 3
PGZ-POST-P141210-PSGE01/12DC-KNV1(D)-TU 3400-005-72453807-07 Polyester 12 2,8
PGZ-POST-P141210-PSGE01/24DC-KNV1(D)-TU 3400-005-72453807-07 Polyester 24 2,8
PGZ-POST-P141210-PSGE01/220AC-KNV1(D)-TU 3400-005-72453807-07 Polyester ~230 2,8
PGZ-POST-N151512-PSGE01/12DC-KNV1(D)-TU 3400-005-72453807-07 Stainless steel 12 3,6
PGZ-POST-N151512-PSGE01/24DC-KNV1(D)-TU 3400-005-72453807-07 Stainless steel 24 3,6
PGZ-POST-N151512-PSGE01/220AC-KNV1(D)-TU 3400-005-72453807-07 Stainless steel~230 3,6
+

EXAMPLES OF SOUND SIGNALING DEVICES WITH PSGE01 PIEZO-SIREN

PKIE-P221512-KGE01CH11-KGE01К11-PSGE01/220AC-KNV1N(D)-TU 3400-005-72453807-07

Пример исполнения ПКИЕ-П221512-КГЕ01Ч11-КГЕ01К11-ПСГЕ01/220AC-КНВ1Н(Г)-ТУ 3400-005-72453807-07

Explosion-proof sound signaling device is made on the base of PKIE-P221512 armored polyester enclosure with pre-installed control elements: KGE01CH11 black momentary button, 1NO+1NC contacts; KGE01K11 red momentary button, 1NO+1NC contacts; PSGE01/220AC explosion-proof piezo-siren with power supply unit ~230 V. One cable gland KNV1N is installed on side D.

PKIE-P261812-LGE03К220-LGE03З220-KGE01Ч11-KGE01К11-PSGE01/12DC-KNV1N(D)-TU 3400-005-72453807-07

Пример исполнения ПКИЕ-П261812-ЛГЕ03К220-ЛГЕ03З220-КГЕ01Ч11-КГЕ01К11-ПСГЕ01/12DC-КНВ1Н(Г)-ТУ 3400-005-72453807-07

Explosion-proof sound signaling device is made on the base of PKIE-P261812 armored polyester enclosure with pre-installed control elements: LGE03K220 red lamp, ~230-380 V; LGE03Z220 green lamp, ~230-380 V; KGE01CH11 black momentary button, 1NO+1NC contacts; KGE01K11 red momentary button, 1NO+1NC contacts; PSGE01/12DC explosion-proof piezo-siren with supply voltage 12 V. Two cable glands KNV1N are installed on side D.

PKIE301410-KGE01З20-KGE07К11-PSGE01/220AC-KNV1N(D)-TU 3400-005-72453807-07

Пример исполнения ПКИЕ301410-КГЕ01З20-КГЕ07К11-ПСГЕ01/220AC-КНВ1Н(Г)-ТУ 3400-005-72453807-07

Explosion-proof sound signaling device is made on the base of PKIE301410 aluminum-silicon alloy enclosure with pre-installed control elements: KGE01Z20 green momentary button, 2NO contacts; KGE07K11 locking mushroom button, unlocking by rotation, 1NO+1NC contacts; PSGE01/220AC explosion-proof piezo-siren with power supply unit ~230 V. One cable gland KNV1N is installed on side D.

PKIE-N231815-2KGE01CH20-KGE07К11-PSGE01/12DC-KNV1N(D)-TU 3400-005-72453807-07

Пример исполнения ПКИЕ-Н231815-2КГЕ01Ч20-КГЕ07К11-ПСГЕ01/12DC-КНВ1Н(Г)-ТУ 3400-005-72453807-07

Explosion-proof sound signaling device is made on the base of PKIE-N231815 enclosure made of stainless steel grade 08Х18Н10 as per GOST 5632-2014 (AISI 304), with pre-installed control elements: two 2KGE01CH20 black momentary buttons, 2NO contacts; KGE07K11 locking mushroom button, unlocking by rotation, 2NO contacts; PSGE01/12DC explosion-proof piezo-siren with supply voltage 12 V. One KNV1N cable gland is installed on side D.

+