Explosion-proof four-, five-, six-, seven-button explosion-proof local control stations and indicating devices PKIV (CSE+CSE)

+
+
x
<
>
Explosion-proof four-, five-, six-, seven-button explosion-proof local control stations and indicating devices PKIV (CSE+CSE)PURPOSE AND SCOPE OF APPLICATIONНовая усиленная конструкция, без изменения весо-габаритных параметров оболочек, позволила расширить область применения оборудования для подгруппы IIC.

Explosion-proof multi-button local control stations and indicating devices PKIV in Exd version are intended for local or remote control of equipment and/or signalization. Local control stations are used in chemical, pharmaceutical, oil industry and where explosion-proof equipment is required.

The products are highly resistant to hydrogen sulphide which is confirmed by TR CU certificates. Service life of flameproof joints of Exd explosion-proof enclosures is more than 25 years.

One of the distinctive features of explosion-proof equipment produced by "ZAVOD GORELTEX" Co. Ltd. is ergonomic design of control, indicating and signaling elements. Large size of control elements makes it possiple to work in gloves (which is important for outdoor operation at low temperatures). Indicating elements have large diameter (40 mm) and are equipped with reflector, which makes the signal clearly visible at large viewing angle and various degrees of surface dirtiness. A wide range of control, indicating and signaling elements of standard version are offered, a version upon customer’s request can also be produced.

Органы управления машиной и (или) оборудованием должны быть выполнены так, чтобы их форма, размеры и поверхности контакта с пользователем соответствовали способу захвата (пальцами, кистью) или нажатия (пальцем руки, ладонью, стопой) Органы управления машиной и (или) оборудованием должны быть выполнены так, чтобы их форма, размеры и поверхности контакта с пользователем соответствовали способу захвата (пальцами, кистью) или нажатия (пальцем руки, ладонью, стопой) IT IS IMPORTANT TO KNOW

Technical Regulation TR CU 010/2011 "On the safety of machinery and equipment".
Annex 1. General regulations of safety machines and equipment. Clause 15:

«…Control devices of a machine and (or) equipment must be constructed so that their form, sizes and contact surfaces of the user correspond to a capture way (fingers, hand) or pressing (hand finger, palm, foot)…»

For the equipment intended for operation at ambient temperatures below zero or in aggressive environment, control elements of the equipment must be of larger size, since the user operates the equipment in protective gloves. It is prohibited to use the control elements that do not meet this requirement.


Взрывозащищенные четырех-, пяти-, шести-, семиместные посты управления и индикации ПКИВ

Each individual product undergoes thorough acceptance in accordance with accurate quality control plan GOST R ISO 9001-2015 (ISO 9001:2015). Compliance with norms and technical specifications of the customer is verified in accordance with special procedure. inspections are carried out stepwise throughout the entire production cycle. Local control stations are produced according to the latest European and Russian technology, and their price can compete even with outdated samples produced in Russia.

Full production cycle starting from casting molds and to ready product is performed at the explosion-proof equipment plant “ZAVOD GORELTEX” Co. Ltd. on the territory of the Russian Federation.

Scope of application - hazardous indoor and outdoor areas in accordance with explosion protection marking, GOST 30852.13-2002 (IEC 60079-14:1996) and areas hazardous with combustible dust ignition, as per GOST IEC 61241-3-2011, dangerous production facilities of I, II, III, IV hazard classes under supervision of Rostekhnadzor and national supervisory bodies of the CU and the CIS countries.

"X" sign place after Ex-marking indicates that it is prohibited to use the device in hazardous mixtures of acetylene and air.

+
CONFORMITY TO STANDARDS IN RUSSIA
ГОСТ 14254-96 (МЭК 529-89), ГОСТ Р МЭК 60079-0-2011, ГОСТ IEC 60079-1-2011, ГОСТ IEC 61241-1-1-2011, ГОСТ Р МЭК 60079-31-2010, ГОСТ 30852.20-2002, ТР ТС 012/2011, Гл. 7.3 ПУЭ, Гл. 7.4 ПУЭ, РД 5.2-093-2004
+
CERTIFICATES
+
TECHNICAL DATA
Ambient temperature, °С:
-60...+40 (Т6/Т85°С)
-60...+60 (Т5/Т100°С)
-60...+60 (Т4/Т135°С)
-60…+60 (for mine normal and general industrial versions)
Maximum voltage, V:
~690 / ⎓250
Maximum current, A:
16
Connecting holes:
Coating:
Antistatic polymer-epoxy coating, rictionally intrinsically safe, resistant to operating environment and ionizing radiation. Color RAL 7035
Enclosure material:
Modified corrosion-resistant aluminum-silicon alloy, resistant to salt spray and other chemical substances including hydrogen sulfide and hydrochloric acid vapors, frictionally intrinsically safe.
Electric shock hazard protection class:
I
Climatic version:
NF1 (upon request NF2, NF3, NF4, NF5, F1, F2, F3, F5, T1, T2, T3, T5, MU1, MU2, MU3, MU4, W2.1, W5)
+
DIMENSIONS, OPTIONS, ACCESSORIES
MARKING
External surface coating as per customer’s specification
/RAL (___)
Captive bolts for cover fastening
/NBK
Breather plug for moisture removal
/VKU
Anti-condensation coating
/AP
Version for tropics with protection against bugs
/TERMITY
Version for nuclear facilities
/MALAJA TECH
Nameplate with inscription as per customer’s specification
/NADPIS "_"
Marine version
/MORE
Earthquake-resistant version
/MSK-64
Nameplates with light-reflective coating
/SVP
Ingress protection degree IP67
/IP67
Remote start device for manual start of the fire extinguishing system (as per requirements of certificate C-RU.АБ03.В.00163)
/UDP
Light fire detector (lamps and one button for lamp testing are only used in the product)
/OP
Drain plug for condensate removal
/DKU
+
OVERALL AND MOUNTING DIMENSIONS

Габаритные и присоединительные размеры 
 ПКИВ

*Size depends on the type of installed control and/or indicating elements

Dimension type Number of mounting holes for elements
Installation thread of elements
Outer
Inner Stand. mounting
Mass, kg
A B C a b c D E F
PKIV311109R4 4 М32х1,5 316 116 93 274 64 68 103 237 8 2.9
PKIV311109R5 5 М32х1,5 316 116 93 274 64 68 103 237 8 2.9
PKIV411109R6 6 М32х1,5 416 116 93 374 64 68 103 337 8 3.7
PKIV411109R7 7 М32х1,5 416 116 93 374 64 68 103 337 8 3.7
+

CONTROL AND INDICATING ELEMENTS WITH METAL BASE OF INCREASED STRENGTH

Corrosion-resistant aluminum, stainless steel and polyvinylchloride are used for production of control elements, which ensures high resistance to mechanical damage and corrosion. One of the distinct features of explosion-proof products of "ZAVOD GORELTEX" Co. Ltd. is the ergonomic design of control, indicating and signaling elements. Large size of M series indicating elements enables to work in gloves (which is important when working outdoors at low temperatures). Indicating elements have large diameter (40 mm) and are equipped with reflector, which makes the signal clearly visible at large viewing angle and various degrees of surface dirtiness. A wide range of control, indicating and signaling elements of standard version are offered, a version upon customer’s request can also be produced. The nameplates are manufactured for buttons and signal lamps upon customer‘s request. 

To increase the reliability of actuation of buttons in low current systems with switching of minor current and voltage up to 50 mA (12V...5V, 50 mA...1mA) Ex d e IIC U buttons with gold-plated contacts /ST are used. Buttons with 2 and 4 A rated operating current in low-current version are not manufactured.

Большой размер элементов управления серии М дает возможность работать в рукавицах (Важно при работе на улице при низкихтемпературах). Элементы индикации имеют большой диаметр 40 мм и оснащены рефлектором, что позволяет четко видеть сигнал прибольшом угле обзора и различном загрязнении поверхности.

Органы управления машиной и (или) оборудованием должны быть выполнены так, чтобы их форма, размеры и поверхности контакта с пользователем соответствовали способу захвата (пальцами, кистью) или нажатия (пальцем руки, ладонью, стопой) Органы управления машиной и (или) оборудованием должны быть выполнены так, чтобы их форма, размеры и поверхности контакта с пользователем соответствовали способу захвата (пальцами, кистью) или нажатия (пальцем руки, ладонью, стопой) IT IS IMPORTANT TO KNOW

Technical Regulation TR CU 010/2011 "On the safety of machinery and equipment".

Annex 1. General regulations of safety machines and equipment. Clause 15:

«…Controls devices of a machine and (or) equipment must be constructed so that their form, sizes and contact surfaces of the user correspond to a capture way (fingers, hand) or pressing (hand finger, palm, foot)…»

For the equipment intended for operation at ambient temperatures below zero or in aggressive environment, control elements of the equipment must have the increased size, since the user operates the equipment in protective gloves. It is prohibited to use the control elements that do not meet this requirement.


MOMENTARY BUTTONS

Type Picture Drawing Mass, kg
KGV01 КНОПКИ БЕЗ ФИКСАЦИИ КГВ01 КНОПКИ БЕЗ ФИКСАЦИИ КГВ01
* When ordering, add /ZSN for protection against accidental pressing
0,14
KGV12 КНОПКИ БЕЗ ФИКСАЦИИ КГВ12Н КНОПКИ БЕЗ ФИКСАЦИИ КГВ12Н 0,05
KGV12N 0,12
Type 3D model and drawing  Color Contacts Maximum voltage, V Rated operating current, А Thread Housing material Installation
KGV01Z11   green 1NO+1NC* ~600
230
1,2 (for 600v), AC-15
3 (for 240v), AC-15
6 (for 120v), AC-15
0,1 (for 600v), DC-13
0,27 (for 250v), DC-13
0,55 (for 125v), DC-13
М32х1,5 aluminum

SHORV

SHORVA

PKIV

PKIVA

KGV01ZH11   yellow
KGV01K11   red
KGV01CH11   black
KGV01B11   white
KGV01S11   blue
KGV01Z20   green 2NO* ~600
230
1,2 (for 600v), AC-15
3 (for 240v), AC-15
6 (for 120v), AC-15
0,1 (for 600v), DC-13
0,27 (for 250v), DC-13
0,55 (for 125v), DC-13
М32х1,5 aluminum

SHORV

SHORVA

PKIV

PKIVA

KGV01ZH20   yellow
KGV01K20   red
KGV01CH20   black
KGV01B20   white
KGV01S20   blue
KGV01Z02   green 2NC* ~600
230
1,2 (for 600v), AC-15
3 (for 240v), AC-15
6 (for 120v), AC-15
0,1 (for 600v), DC-13
0,27 (for 250v), DC-13
0,55 (for 125v), DC-13
М32х1,5 aluminum

SHORV

SHORVA

PKIV

PKIVA

KGV01ZH02   yellow
KGV01K02   red
KGV01CH02   black
KGV01B02   white
KGV01S02   blue
KGV01NZ11   green 1NO+1NC* ~600
230
1,2 (for 600v), AC-15
3 (for 240v), AC-15
6 (for 120v), AC-15
0,1 (for 600v), DC-13
0,27 (for 250v), DC-13
0,55 (for 125v), DC-13
М32х1,5 stainless steel

SHORV

SHORVA

PKIV

PKIVA

KGV01NZH11   yellow
KGV01NK11   red
KGV01NCH11   black
KGV01NB11   white
KGV01NS11   blue
KGV01NZ20   green 2NO* ~600
230
1,2 (for 600v), AC-15
3 (for 240v), AC-15
6 (for 120v), AC-15
0,1 (for 600v), DC-13
0,27 (for 250v), DC-13
0,55 (for 125v), DC-13
М32х1,5 stainless steel

SHORV

SHORVA

PKIV

PKIVA

KGV01NZH20   yellow
KGV01NK20   red
KGV01NCH20   black
KGV01NB20   white
KGV01NS20   blue
KGV01NZ02   green 2NC* ~600
230
1,2 (for 600v), AC-15
3 (for 240v), AC-15
6 (for 120v), AC-15
0,1 (for 600v), DC-13
0,27 (for 250v), DC-13
0,55 (for 125v), DC-13
М32х1,5 stainless steel

SHORV

SHORVA

PKIV

PKIVA

KGV01NZH02   yellow
KGV01NK02   red
KGV01NCH02   black
KGV01NB02   white
KGV01NS02   blue
KGV12   Colorless One changeover ~220 Non-inductive load 
2 (at 12...30 V)
1 (at ~125 V)
0,25 (at ~220 V)
0,1 (gold-plated contacts, at 30 V)
Inductive load 
0,75 (at 12...30 V)
0,4 (at ~125 V)
0,03 (at ~220 V)
0,1 (gold-plated contacts, at 30 V)
М16х1,5 aluminum SHORV
SHORVA
PKIV
PKIVA
KGV12N   stainless steel

* It should be noted that up to 3 contact modules can be connected to the actuator of the button (3 modules in 1 tiers) in different combinations.

Version of buttons with gold-plated contacts used for designing of circuits of low current systems - /ST option. Available for KGV01 types. Example: KGV01CH02/ST.

KEY OPERATED BUTTON

Type Picture Drawing Mass, kg
KGV05
Key operated start button locking in ON/OFF position
Пусковая кнопка  с ключом с возможностью запирания в положении ВКЛ/ВЫКЛ. Пусковая кнопка с ключом с возможностью запирания в положении ВКЛ/ВЫКЛ. 0,2
Type 3D model and drawing Contacts Maximum voltage, V Rated operating current, А Thread Housing material Installation
KGV05CH11   1NO+1NC ~600
230
1,2 (for 600v), AC-15
3 (for 240v), AC-15
6 (for 120v), AC-15
0,1 (for 600v), DC-13
0,27 (for 250v), DC-13
0,55 (for 125v), DC-13
М32x1,5 aluminum

SHORV

SHORVA

PKIV

PKIVA

KGV05CH20   2NO
05CH02   2NC


Version of buttons with gold-plated contacts used for designing of circuits of low current systems - /ST option. Available for KGV01 types. Example: KGV06Z02/ST.

BUTTON WITH LAMP (BUTTON WITH INDICATION)

Type Picture Drawing Mass, kg
KGV06 Кнопка с индикацией Кнопка с индикацией 0,15
KGV06.../ZSN Кнопка с индикацией, опция /ЗСН Кнопка с индикацией, опция /ЗСН 0,22
Type 3D model and drawing Color Contacts Maximum voltage, V Rated operating current, А BASE Thread Housing material Installation
KGV06Z11   green

two modules of button’s contact block:

1NO+1NC
module of connection of BA9S lamp *
~600
230
button 1,2 (for 600v), AC-15
3 (for 240v), AC-15
6 (for 120v), AC-15
0,1 (for 600v), DC-13
0,27 (for 250v), DC-13
0,55 (for 125v), DC-13
BA9S** lamp М32х1,5 aluminum

SHORV

SHORVA

PKIV

PKIVA

KGV06ZH11   amber
KGV06K11   red
KGV06B11   white
KGV06S11   blue
KGV06Z20   green two modules of button’s contact block: 2NO
module of connection of BA9S lamp*
~600
230
button 1,2 (for 600v), AC-15
3 (for 240v), AC-15
6 (for 120v), AC-15
0,1 (for 600v), DC-13
0,27 (for 250v), DC-13
0,55 (for 125v), DC-13
BA9S** lamp М32х1,5 aluminum

SHORV

SHORVA

PKIV

PKIVA

KGV06ZH20   amber
KGV06K20   red
KGV06B20   white
KGV06S20   blue
KGV06Z02   green two modules of button’s contact block: 2NC
module of connection of BA9S lamp*
~600
230
button 1,2 (for 600v), AC-15
3 (for 240v), AC-15
6 (for 120v), AC-15
0,1 (for 600v), DC-13
0,27 (for 250v), DC-13
0,55 (for 125v), DC-13
BA9S** lamp М32х1,5 aluminum

SHORV

SHORVA

PKIV

PKIVA

KGV06ZH02   amber
KGV06K02   red
KGV06B02   white
KGV06S02   blue

*Only one connection module of BA9S indicating lamp can be connected. There are indicating lamps for installation into BA9S base of various voltage: 6DC, 6AC, 12DC, 12AC, 24DC, 24AC, 36DC, 36AC, 48DC, 48AC, 110DC, 110AC, 220DC, 220AC. Lamp’s voltage is given in the component’s marking: KGV06K11(12DC), 220AC by default. (There are color limitations, specification is required when making an order).

Version of buttons with gold-plated contacts used for designing of circuits of low current systems - /ST option. Example: KGV06Z20/ST.


SIGNAL LAMPS, SOLID-STATE INDICATORS

Housings of signal lamps of LGV01... series are manufactured from polyvinyl chloride. Characterized by simple installation. Lamp or LED with BA9s base is installed in the housing of the signal lamp.
Power consumption 20mA, approx. 50 000 hours of operation.
Type Picture Drawing Mass, kg
LGV01 Сигнальные лампы Сигнальные лампы 0,031
Exd signal lamp with ultrabright LED
Power consumption 20mA, approx. 50 000 hours of operation. LGV03 explosion-proof indicators are used only for auxiliary indication of uninterruptible power supply sources.
Type Picture Drawing Mass, kg
LGV03 Индикационные лампы Индикационные лампы 0,052
Type 3D model and drawing Color Thread BASE Housing material Installation
LGV01Z...   green М32х1,5 BA9S* polycarbonate

SHORV

SHORVA

PKIV

PKIVA

LGV01ZH...   amber
LGV01K...   red
LGV01B...   white
LGV01S...   blue

*There are indicating lamps for installation into BA9S base of various voltage: 6DC, 6AC, 12DC, 12AC, 24DC, 24AC, 36DC, 36AC, 48DC, 48AC, 110DC, 110AC, 220AC, 380AC. Lamp’s voltage is given in the component’s marking: LGV01ZH12DC, 220AC by default. (There are color limitations, specification is required when making an order).


Type Color Voltage, V Thread BASE Housing material Installation
LGV03КЗ* two-colored (red+ green)* 2,2V M16x1,5 built-in LED aluminum

SHORV

SHORVA

PKIV

PKIVA

* other colors upon request.


EMERGENCY STOP BUTTONS

Type Picture Drawing Mass, kg
KGV11 Кнопка “грибок“ без фиксации Кнопка “грибок“ без фиксации 0,185
KGV07 Кнопка “грибок“ с фиксацией, отпирание вращением Кнопка “грибок“ с фиксацией, отпирание вращением 0,185
KGV09 Кнопка “грибок“ с фиксацией, отпирание ключом Кнопка “грибок“ с фиксацией, отпирание ключом 0,205
KGV09.../ZSNCH Кнопка “грибок“ с фиксацией, отпирание ключом, опция /ЗСНЧ Кнопка “грибок“ с фиксацией, отпирание ключом, опция /ЗСНЧ 0,407

Защита от случайного нажатия /ЗСН
Protection against accidental pressing /ZSN
Опция запирания /ЗСНЗ
Locking option /ZSNZ
Type 3D model and drawing Description Contacts Color Maximum voltage, V Rated operating current, А Thread Housing material Installation
KGV11К11   momentary mushroom button two modules 
1NO+1NC
Red ~600
230
1,2 (for 600v), AC-15
3 (for 240v), AC-15
6 (for 120v), AC-15
0,1 (for 600v), DC-13
0,27 (for 250v), DC-13
0,55 (for 125v), DC-13
М32х1,5 aluminum

SHORV

SHORVA

PKIV

PKIVA

KGV11К20   momentary mushroom button two modules 
2NO
Red
KGV11К02   momentary mushroom button two modules 
2NC
Red
KGV11CH11   momentary mushroom button two modules 
1NO+1NC
Black ~600
230
1,2 (for 600v), AC-15
3 (for 240v), AC-15
6 (for 120v), AC-15
0,1 (for 600v), DC-13
0,27 (for 250v), DC-13
0,55 (for 125v), DC-13
М32х1,5 aluminum

SHORV

SHORVA

PKIV

PKIVA

KGV11CH20   momentary mushroom button two modules
2NO
Black
KGV11CH02   momentary mushroom button two modules
2NC
Black
KGV07K11   locking mushroom button,
unlocking by rotation
two modules
1NO+1NC
Red ~600
230
1,2 (for 600v), AC-15
3 (for 240v), AC-15
6 (for 120v), AC-15
0,1 (for 600v), DC-13
0,27 (for 250v), DC-13
0,55 (for 125v), DC-13
М32х1,5 aluminum

SHORV

SHORVA

PKIV

PKIVA

KGV07K20  

locking mushroom button, unlocking by rotation

two modules 
2NO
Red
KGV07K02  

locking mushroom button, unlocking by rotation

two modules
2NC
Red
KGV09K11   locking mushroom button,
key release
two modules 
1NO+1NC
Red ~600
230
1,2 (for 600v), AC-15
3 (for 240v), AC-15
6 (for 120v), AC-15
0,1 (for 600v), DC-13
0,27 (for 250v), DC-13
0,55 (for 125v), DC-13
М32х1,5 aluminum

SHORV

SHORVA

PKIV

PKIVA

KGV09K20  

locking mushroom button, key release

two modules
2NO
Red
KGV09K02  

locking mushroom button, key release

two modules 
2NC
Red
KGV11NK11   momentary mushroom button two modules 
1NO+1NC
Red ~600
230
1,2 (for 600v), AC-15
3 (for 240v), AC-15
6 (for 120v), AC-15
0,1 (for 600v), DC-13
0,27 (for 250v), DC-13
0,55 (for 125v), DC-13
М32х1,5 stainless steel

SHORV

SHORVA

PKIV

PKIVA

KGV11NK20   momentary mushroom button two modules 
2NO
Red
KGV11NK02   momentary mushroom button two modules 
2NC
Red
KGV11NCH11   momentary mushroom button two modules
1NO+1NC
Black ~600
230
1,2 (for 600v), AC-15
3 (for 240v), AC-15
6 (for 120v), AC-15
0,1 (for 600v), DC-13
0,27 (for 250v), DC-13
0,55 (for 125v), DC-13
М32х1,5 stainless steel

SHORV

SHORVA

PKIV

PKIVA

KGV11NCH20   momentary mushroom button two modules 
2NO
Black
KGV11NCH02   momentary mushroom button two modules
2NC
Black
KGV07NK11  

locking mushroom button, unlocking by rotation

two modules 
1NO+1NC
Red ~600
230
1,2 (for 600v), AC-15
3 (for 240v), AC-15
6 (for 120v), AC-15
0,1 (for 600v), DC-13
0,27 (for 250v), DC-13
0,55 (for 125v), DC-13
М32х1,5 stainless steel

SHORV

SHORVA

PKIV

PKIVA

KGV07NK20  

locking mushroom button, unlocking by rotation

two modules 
2NO
Red
KGV07NK02  

locking mushroom button, unlocking by rotation

two modules 
2NC
Red

Version of buttons with gold-plated contacts used for designing of circuits of low current systems - /ST option. Example: KGV07K11/ST.

SWITCHES

Type Picture Drawing Mass, kg
PGVA Переключатель, два фиксированных положения 0,16
PGVA...N 0,23
PGVAZ Переключатель с ключом, два фиксированных положения Переключатель с ключом, два фиксированных положения 0,18
Type 3D model and drawingDescription Схема замыкания Maximum voltage, V Rated operating current, А Thread Contacts Housing material Installation
PGVA1Z   Switch, two lockable positions ~600
230
1,2 (for 600v), AC-15
3 (for 240v), AC-15
6 (for 120v), AC-15
0,1 (for 600v), DC-13
0,27 (for 250v), DC-13
0,55 (for 125v), DC-13
М32х1,5 two modules
1NO+1NC
aluminum

SHORV

SHORVA

PKIV

PKIVA

PGVA2I   Switch, two lockable positions ~600
230
1,2 (for 600v), AC-15
3 (for 240v), AC-15
6 (for 120v), AC-15
0,1 (for 600v), DC-13
0,27 (for 250v), DC-13
0,55 (for 125v), DC-13
М32х1,5 two modules
2NO
aluminum

SHORV

SHORVA

PKIV

PKIVA

PGVAZ1Z  

Key operated switch, two lockable positions

~600
230
1,2 (for 600v), AC-15
3 (for 240v), AC-15
6 (for 120v), AC-15
0,1 (for 600v), DC-13
0,27 (for 250v), DC-13
0,55 (for 125v), DC-13
М32х1,5 two modules
1NO+1NC
aluminum

SHORV

SHORVA

PKIV

PKIVA

PGVAZ2I   Key operated switch, two lockable positions ~600
230
1,2 (for 600v), AC-15
3 (for 240v), AC-15
6 (for 120v), AC-15
0,1 (for 600v), DC-13
0,27 (for 250v), DC-13
0,55 (for 125v), DC-13
М32х1,5 two modules
2NO
aluminum

SHORV

SHORVA

PKIV

PKIVA

PGVA1ZN   Switch, two lockable positions ~600
230
1,2 (for 600v), AC-15
3 (for 240v), AC-15
6 (for 120v), AC-15
0,1 (for 600v), DC-13
0,27 (for 250v), DC-13
0,55 (for 125v), DC-13
М32х1,5 two modules
1NO+1NC
stainless steel

SHORV

SHORVA

PKIV

PKIVA

PGVA2IN   Switch, two lockable positions ~600
230
1,2 (for 600v), AC-15
3 (for 240v), AC-15
6 (for 120v), AC-15
0,1 (for 600v), DC-13
0,27 (for 250v), DC-13
0,55 (for 125v), DC-13
М32х1,5 two modules
2NO
stainless steel ЩSHORV

SHORVA

PKIV

PKIVA

PGVAZ1ZN

Key operated switch, two lockable positions

~600
230
1,2 (for 600v), AC-15
3 (for 240v), AC-15
6 (for 120v), AC-15
0,1 (for 600v), DC-13
0,27 (for 250v), DC-13
0,55 (for 125v), DC-13
М32х1,5 two modules
1NO+1NC
stainless steel

SHORV

SHORVA

PKIV

PKIVA

PGVAZ2IN Key operated switch, two lockable positions ~600
230
1,2 (for 600v), AC-15
3 (for 240v), AC-15
6 (for 120v), AC-15
0,1 (for 600v), DC-13
0,27 (for 250v), DC-13
0,55 (for 125v), DC-13
М32х1,5 two modules
2NO
stainless steel

SHORV

SHORVA

PKIV

PKIVA

Version of buttons with gold-plated contacts used for designing of circuits of low current systems - /ST option. Example: PGVA2I/ST.

OPERATING HANDLES FOR SWITCHES

Operating handles for circuit breakers and switches for installation into explosion-proof enclosures are selected depending on number of poles and type of circuit breaker. Handle’s axle length can be adapted to the type of circuit breaker and an enclosure. Handles can be sealed.

Type Picture Description Thread Material,
application
Mass,
kg
RGV01 Ручка управления РГВ01 Ручка управления РГВ01 М20х1,5

Actuator – aluminum; axle – stainless steel. Cam switches. Fixed installation depth. Connection of contact group 25-63 A.

0,1
RGVN01 Ручка управления РГВН01 Ручка управления РГВН01 М20х1,5

Actuator – aluminum; axle – stainless steel. Cam switches. Fixed installation depth. Connection of contact group 25-63 A.

0,1
RGV05 Ручка управления РГВ05 Ручка управления РГВ05 М16х1,5

Actuator – aluminum; axle – stainless steel. Motor protection circuit breakers. Cut pin (adjusting by depth). Installation on the circuit breakers with turning handles. Tested on Schneider, ABB, Siemens, EATON products.

0,2
RGVN05 Ручка управления РГВН05 Ручка управления РГВН05 М16х1,5

Actuator – aluminum; axle – stainless steel. Motor protection circuit breakers. Cut pin (adjusting by depth). Installation on the circuit breakers with turning handles. Tested on Schneider, ABB, Siemens, EATON products.

0,2
RGV08 Ручка управления РГВ08 Ручка управления РГВ08 М20х1,5

Actuator – aluminum; axle – stainless steel. Motor protection circuit breakers. Cut pin (adjusting by depth). Installation on molded case circuit breakers (up to 230 A). Tested on Schneider, ABB, IEK products. Possibility to install additional bracket for compatibility with circuit breakers of up to 630 A.

0,3
RGVN08 Ручка управления РГВН08 Ручка управления РГВН08 М20х1,5

Actuator – aluminum; axle – stainless steel. Motor protection circuit breakers. Cut pin (adjusting by depth). Installation on molded case circuit breakers (up to 230 A). Tested on Schneider, ABB, IEK products. Possibility to install additional bracket for compatibility with circuit breakers of up to 630 A.

0,3
RGV09 Ручка управления РГВ09 Ручка управления РГВ09 М16х1,5

Actuator – aluminum; axle – stainless steel. Modular circuit breakers of up to 120 A. Cut pin (adjusting by depth). Tested on Schneider, ABB, IEK products. Not applicable with some circuit breakers due to geometry of actuator (some Siemens, TDM, Legrand series).

0,2
RGVN09 Ручка управления РГВН09 Ручка управления РГВН09 М16х1,5

Actuator, axle – stainless steel. Modular circuit breakers of up to 120 A. Cut pin (adjusting by depth). Tested on Schneider, ABB, IEK products. Not applicable with some circuit breakers due to geometry of actuator (some Siemens, TDM, Legrand series).

0,2
RGV11 Ручка управления РГВ11 М16х1,5

Actuator – aluminum; axle – stainless steel. Modular circuit breakers, side installation. Fixed installation depth. Applied mainly in SHGVA-VA. Possibility to install additional bracket for compatibility with circuit breakers of up to 120 A.

0,1
RGVN11 Ручка управления РГВН11 Ручка управления РГВН11 М16х1,5

Actuator, axle – stainless steel. Modular circuit breakers, side installation. Fixed installation depth. Applied mainly in SHGVA-VA. Possibility to install additional bracket for compatibility with circuit breakers of up to 120 A

0,1
RGV13 Ручка управления РГВ13 Ручка управления РГВ13 М16х1,5

Actuator – aluminum; axle – stainless steel. Modular circuit breakers of up to 63 A. Analogue of RGV(N)09 for denser installation. Applied with single and double pole circuit breakers.

0,2
RGVN13 Ручка управления РГВН13 Ручка управления РГВН13 М16х1,5

Actuator, axle – stainless steel. Modular circuit breakers of up to 63 A. Analogue of RGV(N)09 for more dense installation. Applied with single and double pole circuit breakers.

0,2
Locking of handles of switches, /ZAMOK option
M698 M698/1 M698/2 M698/3
Блокировки ручек переключателей, опция /ЗАМОК Блокировки ручек переключателей, опция /ЗАМОК Блокировки ручек переключателей, опция /ЗАМОК Блокировки ручек переключателей, опция /ЗАМОК

Блокировки ручек переключателей, опция /ЗАМОКБлокировки ручек переключателей, опция /ЗАМОК

CONTACT BLOCKS TO ROTARY SWITCHES

Switch type* Rated current,
А
Circuit diagran Operating handle position Description
RGV...+PG1Х10 10 "Start-stop" command for spring return switches to B as from A, C, with locking in B position
RGV...+PG1R10 10 "Start-stop" command for spring return switches from A to B, with lockable position in locking C
RGV...+PG2R10 10
RGV...+PG1Z10 10 ПГВА1ЗН Switch with two lockable positions. Serves for switching from manual to automatic control
RGV...+PG2Z10 10
RGV...+PG3Z10 10
RGV...+PG1I10 10 Circuit breaker
RGV...+PG1I16 16
RGV...+PG1I32 32
RGV...+PG1I40 40
RGV...+PG1I63 63
RGV...+PG2I10 10 ПГВА2ИН
RGV...+PG2I16 16
RGV...+PG2I32 32
RGV...+PG2I40 40
RGV...+PG2I63 63
RGV...+PG3I10 10
RGV...+PG3I16 16
RGV...+PG3I32 32
RGV...+PG3I40 40
RGV...+PG3I63 63
RGV...+PG4I10 10
RGV...+PG4I16 16
RGV...+PG4I32 32
RGV...+PG4I40 40
RGV...+PG4I63 63
RGV...+PG1С10 10 Switch with three lockable positions, locking in central position
RGV...+PG2С10 10
RGV...+PG3С10 10
RGV...+PG1W10 10 Switch with three positions, locking in central position with spring return to B position
RGV...+PG2W10 10
RGV...+PG1Y10 10 Reversing mechanism with five positions, with operating handle, locking in A, B, C positions with spring return from D to A and from E to C, locking in B position
RGV...+PG1М10 10 "Start" command for spring return switches to A position

* Contact blocks and rotary switches are compatible with the following types of operating handles: RGV01, RGVN01, RGV02.

When ordering, add contact block holder /D to the designation of the switches.


RHEOSTAT (POTENTIOMETER)

Type Picture Description Installation Material
Mass, kg
RGV12 РЕОСТАТ РЕОСТАТ SHORV
SHORVA
rheostat‘s handle
- aluminum;
axle - stainless steel
0,13
Type Characteristics Picture
RSG01 0...1 kOhm, 2 W РЕОСТАТ
RSG02 0...1 kOhm, 1 W
RSG03 0...2,5 kOhm, 10 W
RSG04 0...5 kOhm, 1 W
RSG05 0...10 kOhm, 2 W

SCREW PLUGS

ВИНТОВЫЕ ШТЕКЕРЫScrew plugs are supplied by order. The plug is intended for switching of internal circuits of a local control station when mounting and dismantling the cover with control elements. They are also intended for connection of the cable with conductors up to 16 sq. mm. Silver-plated contacts ensure low transient resistance. Steel spring ensures that there will be no problems with contacts in case of wide temperature fluctuations.

Type Description Rated operating voltage, V Rated maximum current, А Cross-section of the connected cable
PC 16/2 Double-pole screw plug ~600
600
76 up to 16 mm2
PC 16/3 Three-pole screw plug
PC 16/4 Four-pole screw plug
PC 16/5 Five-pole screw plug
PC 16/6 Six-pole screw plug
PC 16/7 Seven-pole screw plug
PC 16/8 Eight-pole screw plug
PC 16/9 Nine-pole screw plug
+
FORMATION OF MARKING
PKIV Х  -  X-...-X  -  XX-...-XX  /  Х  – TU 3400-005-72453807-07








              Dimension type of the enclosure
              Configuration
              Number and dimension type of cable glands
              Options, accessories and versions

Example of order: PKIV311109R5 -KGV01K11-4KGV01CH02-KNV2MNK/R/MORE-TU 3400-005-72453807-07
- Type of local control station: PKIV311109R5
- Complete with: button KGV01 red К (normally closed + normally closed contacts 11), 4 buttons KGV01 black CH (two normally closed contacts 02), cable gland for non-armored cable KNV2MNK/R, diameter of crimped cable 6 - 18 mm, nickel-plated brass.
-  Options, accessories and versions:
marine version /MORE.

+
+