Explosion-proof equipment plant
OKT3 support brackets are used to insert a heating cable under the layer of thermal insulation. They make it possible to insert a heating cable under the layer of thermal insulation, simplifying the mounting and preventing damage of heating cable. Explosion-proof support brackets are designed in such a way that they are easily fastened to circular cross-section conduits.
Increased diameter of the support bracket as well as use of fiberglass-reinforced impact-resistant antistatic polyester with addition of graphite ensure resistance to impact loads.
Explosion-proof support brackets are installed on the conduit by means of two metal fastening clamps.
OKT3 explosion-proof support brackets are used as a part of finished explosion-proof boxes for connection of power supply to the heating accessories under the thermal insulation.
Scope of application – outdoor and indoor hazardous areas as per explosion protection marking, GOST 30852.13-2002 (IEC 60079-14:1996), areas with presence of combustible dust, as per GOST IEC 61241-3-2011, dangerous production facilities of I, II, III, IV hazard class supervised by Rostechnadzor of the RF and national technical supervision bodies of the Customs Union and CIS countries.
Marking:
1Ex e IIС Gb X* 2Ex nR IIС Gc X* Ex tb IIIC Db X* Ex e IIС Gb U Ex nR IIС Gc U Ex tb IIIC Db U
| Minimum dimensions of heating cables, mm | Maximum dimensions of heating cables, mm | ||
| a | b | A | B |
| 3 | 11 | 6,2 | 13,7 |
| ОКТ3 | / | Х | – TU 3400-007-72453807-07 |
| Options, accessories and versions |
Example: ОКТ3–TU 3400-007-72453807-07
